 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTE927D & NTE927SM Integrated Circuit Differential Video Amplifier Description: The NTE927D and NTE927SM are two-stage, differential input, differential output, wide-band video amplifiers. The use of internal series-shunt feedback gives wide band bandwidth with low phase distortion and high gain stability. Emitter-follower outputs provide a high current drive, low impedance capability. Its 120MHz bandwidth and selectable gains of 10, 100, and 400, without need for frequency compensation, make it a very useful circuit for memory element drivers, pulse amplifiers, and wide band gain stages. Features: D 120MHz Bandwidth D 250k Input Resistance D No Frequency Compensation Required D Selectable Gains of 10, 100 and 400 D High Common Mode Rejection Ratio at High Frequencies Applications: D Magnetic Tape Systems D Disk File Memories D Thin and Thick Film Memories D Woven and Plated Wire Memories D Wide Band Video Amplifiers Absolute Maximum Ratings: Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V Common Mode Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V Output Current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA Power Dissipation (Note 1), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +100C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70C Lead Temperature (Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +260C Note 1. For operation at elevated temperatures, derate device based on a thermal resistance of +150C/W junction to ambient or +45C/W junction to case. Electrical Characteristics: (TA = +25C, unless otherwise specified, VS = 6V) Parameter Differential Voltage Gain Gain 1 (Note 2) Gain 2 (Note 3) Gain 3 (Note 4) Bandwidth Gain 1 Gain 2 Gain 3 Rise Time Gain 1 Gain 2 Gain 3 Propagation Delay Gain 1 Gain 2 Gain 3 Input Resistance Gain 1 Gain 2 Gain 3 Input Capacitance Input Offset Current Input Bias Current Input Noise Voltage Input Voltage Range Common Mode Rejection Ratio Gain 2 Gain 2 Supply Voltage Rejection Ratio Gain 2 Output Offset Voltage Gain 1 Gain 2 and 3 Output Common Mode Voltage Output Voltage Swing Output Sink Current Output Resistance Power Supply Current RL = VCM = 1V, f 100kHz VCM = 1V, f = 5MHz VS = 0.5V RL = RL = RL = 2k BW = 1kHz to 10MHz Gain 2 VOUT = 1Vp-p - - - - 10 - - - - - 1.0 60 - 50 - - 2.4 3.0 2.5 - - 7.5 6.0 3.6 4.0 30 250 2.0 0.4 9.0 12 - 86 60 70 0.6 0.35 2.9 4.0 3.6 20 18 - 10 - k - - - - 5.0 30 - - - - dB - V 1.5 1.5 3.4 - - - 24 mA mA V pF A A Vrms V dB Test Conditions Min 250 80 8.0 - - - - - - Typ 400 100 10 40 90 120 10.5 4.5 2.5 Max 600 120 12 MHz - - - ns - - - ns Unit RL = 2k, VOUT = 3Vp-p Electrical Characteristics: (The following specifications apply for 0 < TA < +70C, VS = 6V) Parameter Differential Voltage Gain Gain 1 Gain 2 Gain 3 Input Resistance Input Offset Current Input Bias Current Input Voltage Range Common Mode Rejection Ratio Gain 2 Supply Voltage Rejection Ratio Gain 2 Output Offset Voltage Gain 1 Gain 2 and 3 Output Voltage Swing Output Sink Current Power Supply Current RL = VCM = 1V, f 100kHz VS = 0.5V RL = RL = 2k Test Conditions Min 250 80 8.0 8 - - 1.0 50 50 - - 2.8 2.5 - Typ - - - - - - - - - - - - - - Max 600 120 12.0 - 6 40 - - dB - V 1.5 1.5 - - 27 Vpp mA mA k A A V dB Unit RL = 2k, VOUT = 3Vp-p Gain 2 Note 2. Pins G1A and G1B connected together. Note 3. Pins G2A and G2B connected together. Note 4. Gain select pins open. Pin Connection Diagram Input 2 N.C. Gain Select G2B Gain Select G1B V (-) N.C. Output 2 1 2 3 4 5 6 7 14 Input 1 13 N.C. 12 Gain Select G2A 11 Gain Select G1A 10 V (+) 9 8 N.C. Output 1 NTE927D 14 8 1 7 .785 (19.95) Max .200 (5.08) Max .300 (7.62) .100 (2.45) .600 (15.24) .099 (2.5) Min NTE927SM .340 (8.64) 14 8 .236 (5.99) .154 (3.91) 1 7 .050 (1.27) 016 (.406) 061 (1.53) .006 (.152) .198 (5.03) NOTE: Pin1 on Beveled Edge |
Price & Availability of NTE927SM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |